Next: Known Limitations
Up: PICsIT data analysis
Previous: PICsIT spectral extraction from
Contents
It is possible to produce a lightcurve of the PICsIT detector
from the spectral-timing data.
To build it, it is enough to run the analysis from the COR to DEAD level and then from LCR to LCR (of course,
it is not a problem
if you have already done the analysis up to the IMA2 level). Do not forget to disable ISGRI and enable PICsIT
for the analysis.
The results are in the following FITS files:
./scw/RRRRPPPPSSSF.001/picsit_lcr.fits
These
files can be analyzed with standard xronos tools.
inthelp@sciops.esa.int