PICsIT Timing Analysis

It is possible to produce a lightcurve of the PICsIT detector from the spectral-timing data. To build it, it is enough to run the analysis from the COR to DEAD level and then from LCR to LCR (of course, it is not a problem if you have already done the analysis up to the IMA2 level). Do not forget to disable ISGRI and enable PICsIT for the analysis. The results are in the following FITS files:

./scw/RRRRPPPPSSSF.001/picsit_lcr.fits

These files can be analyzed with standard xronos tools.